REFERENCES (cont.) - doerr60024

ERDC TN-DOER-R6

December 2004

Theriault, J. A., and Mitchell, R. J. (1997). "Use of a modeling centrifuge for testing clay liner compatibility with

permeants," Canadian Geotechnical Journal 34 (1), 71-77.

U.S. Army Corps of Engineers (USACE). (1970). "Laboratory soils testing," Engineer Manual 1110-2-1906,

Washington, DC.

_______. (1987). "Confined disposal of dredged material," Engineer Manual 1110-2-5027, Office, Chief of

Engineers, Washington, DC.

_______. (1994). "Technical guidelines for hazardous and toxic waste treatment and cleanup activities," Engineer

Manual 1110-1-502, Office, Chief of Engineers, Washington, DC.

_______. (1995). "Construction control for earth and rock-fill dams," Engineer Manual 1110-2-1911, Office, Chief

of Engineers, Washington, DC.

_______. (2003). "Evaluation of dredged material proposed for disposal at island, nearshore, or upland confined

disposal facilities testing manual," Technical Report ERDC/EL TR-03-1, U.S. Army Engineer Research and

Development Center, Vicksburg, MS.

U.S. Army Engineer Waterways Experiment Station (USAE WES) (1998). "Use of risk assessment in dredging and

dredged material management," Technical Note DOER-R1, U.S. Army Engineer Waterways Experiment

Station, Vicksburg, MS.

U.S. Environmental Protection Agency (USEPA). (1978). "Liners for sanitary landfills and chemical and hazardous

waste disposal sites," EPA 600/9-78/005, Washington, DC.

_______. (1985). "Assessment of synthetic membrane successes and failures at waste storage and disposal sites,"

EPA 600/2-85/100, U.S. Environmental Protection Agency, Washington, DC.

_______. (1986a). "Design, construction, and evaluation of clay liners for waste management facilities," EPA

530/SW-86/007F, U.S. Environmental Protection Agency, Washington, DC.

_______. (1986b). "Technical guidance document: Construction quality assurance for hazardous waste land

disposal facilities," EPA 530/SW-86/031, U.S. Environmental Protection Agency, Washington, DC.

_______. (1986c). "Resistance of flexible membrane liners to chemicals and wastes," EPA 600/2-86/058, U.S.

Environmental Protection Agency, Washington, DC.

_______. (1987). "Manual of procedures and criteria for inspecting the installation of flexible membrane liners in

hazardous waste facilities," EPA 600/8-87/056, U.S. Environmental Protection Agency, Washington, DC.

_______. (1988a). "Guide to technical resources for the design of land disposal facilities," EPA/625/6-88/018, U.S.

Environmental Protection Agency, Washington, DC.

_______. (1988b). "Liners for waste containment and other impoundment facilities," EPA/600/2-88/052, U.S.

Environmental Protection Agency, Washington, DC.

_______. (1989). "Requirements for hazardous waste landfill design, construction and closure," EPA/625/4-89/022,

U.S. Environmental Protection Agency, Washington, DC.

_______. (1991a). "Design, construction, and operation of hazardous and non-hazardous waste surface

impoundments," EPA/530/SW-91/054, U.S. Environmental Protection Agency, Washington, DC.

_______. (1991b). "Compatibility of flexible membrane liners and MSW leachates," EPA 600/2-91/040, U.S.

Environmental Protection Agency, Washington, DC.